Polyurea Coatings on Flat Roofs

Polyurea is a defensive rooftop coating which can be used to accomplish an extensive variety of physical properties. The most basic ability of Polyurea coatings on flat roofs is to withstand any weather and water conditions. At www.waterproof.ie you can get an extremely affordable and amazing services of Polyurea coatings on flat roofs. We are employing best of the best workers and highest quality material to provide the Polyurea coatings services for flat roofs.

Benefits of Polyurea coatings on flat roofs:

  • Saves your rooftop from damage by rain or any other weather condition.

  • Astounding elastomeric properties

  • Seals existing leaks

  • Can be made slip safe, and shaded to suit

  • Easy to apply coats on a wide range of materials including metal rooftops

  • Applies effectively and sets rapidly in an extensive variety of temperatures and humidity levels

What is the reason of leaking of Flat roofs?

Flat rooftops and green rooftops are waterproofed with single layers which have creases and are not reinforced, or Asphalt which ends up delicate and does not suit partial expansion.

The way to flat rooftop waterproofing is that the framework is consistent, completely reinforced, and dry in seconds. Polyurea coatings combine extreme application properties, for example, fast cure (even at temperatures well underneath 0°C) and obtuseness to moistness.

Polyurea coatings on flat roofs have excellent physical properties, for example, weather protection, adaptability, elasticity, fabrication and water protection. The outcome is phenomenal long haul weather protection.

The rooftop waterproofing framework utilizes 100 percent-solids, so no solvents, no outflows and no VOC, consequently a naturally well-disposed covering. Because of its outstanding properties, the Polyurea shower coatings are utilized globally to waterproof every kind of structures.

Solution to the Problem:

We proposed the utilization of a spray applied Polyurea waterproofing coating by our expert team at www.ultimatelinings.ie.

The Polyurea material we chose to provide this flat rooftop coating is greatest in quality. Materials we use can prolong more than 900% making it especially appropriate for repairing spilling tar rooftops which can move essentially inside themselves. Since the material is shower connected it frames a consistent layer without joints.

Our customers are not only happy with our services yet they save a lot of money for repairing leaking flat roofs. You can also get these coatings in variety of colors to make your roof look more attractive and yet strong & sturdy in structure.

Get the Best Roof at the Best Price:

Polyurea coatings on flat roofs is a moderate long haul waterproofing answer for every kind of business and domestic properties. It meets considerable strong structure and will even decrease future rainstorm harm—when applied effectively. At www.ultimatelinings.ie offers the best quality in the lowest price possible for Polyurea coatings on flat roofs. We do not compromise on quality yet we provide best services in best prices.

Polyurea Spray Coating System:

Our Polyurea coating on flat rooftop are intended to last 30 – 50 years relying upon environment. The system empowers us to introduce heat protection if required by the customer without infuriating within the building.

Sprayed onto the rooftops, the covering dries inside 10 seconds and can be strolled on straight away. The Polyurea covering can be applied to a rooftop including muddled rooftop geometries.

If you are suffering from a flat roof leaking or you need to repair your rooftop you can utilize our services of Polyurea coating on flat roofs. We are expert at what we do and we work on every kind of roof material providing you the ultimate quality you are looking for.


Flat Roofing Sprayed Polyurethane Foam.

spray coating a industrial flat roof

Waterproof.ie technical team have been asked to visit a large flat corrugated steel cladded roof and the business owners were have problem with condensation underneath.

There were three separate issues going on with this roof, all of which compounded the issue rooted in the failure to ensure in the first place that the roof was properly waterproofed.

To start with, the roof wasn’t watertight, so there were leaks whenever it rained. Secondly, there was no insulation installed underneath the roof. This lack of insulation caused condensation to occur inside the building.

Because of these issues, we had to come up with a different system than we would normally use.

The Waterproof.ie team had planned on waterproofing the metal roof using a Waterproof.ie closed cell foam insulation and the Waterproof.ie pure  polyurea coating.

Waterproof.ie also recognized that condensation problem stemmed from the fact that the existing coating was cooling the roof of the building, which wouldn’t be a problem if the building had insulation.

However, without insulation, when temperatures dropped overnight and then warmed up during the day, condensation developed on the ceiling of the building.  In other words, it would “rain” inside the building every day.

Waterproof.ie proposed that their cold cell insulation foam be applied to the entire roof and this would show the owners exactly how the spray foam would insulate the building and eliminate condensation.. Even though applying Waterproof.ie closed cell insulation foam would add to the cost of the job, it would be worth every penny.

Flat Roofing Sprayed Polyuret
Flat Roofing Sprayed Polyurethane Foam

The roof was power-hosed and all loose dirt and contamination was completely removed. The roof was then allowed to dry and the Waterproof.ie closed cell insulation foam was applied and straight away the ULXT 6613, 100-percent solids pure polyurea, was applied over the foam. The roof was also fitted with various types of mushroom roof vents allow any water and moisture to evaporate or gas off.

This roof is now leak-free, the building is properly insulated, and it is no longer any condensation problem in the inside. The building is now conserving energy and saving money.

Waterproof.ie Sprayed Polyurethane Foam and Polyurea roofing is a probably the best of all the flat roofing options available in today’s market. It has a plethora of benefits associated with it and very few drawbacks.

Waterproof.ie spray foam and polyurea roofing is a roofing system that is spray applied directly to the existing roof surface; it cannot be a standalone system, the foam provides the watertight bond to the roof substrate and the polyurea will provide a waterproof, seamless jointless roofing membrane that will endure the toughest of weather and adverse conditions. Specially formulated chemicals are mixed together in a unique spray gun. This mixing turns the liquid to foam, which then expands to many times its original size.

The advantages of foam are its ease of application, its versatility, its insulating capabilities and its strength. Foam is very easy to apply once you are a trained applicator. It takes some skill and knowledge of the product, but after learning that and practicing it is like riding a bike. It can also adhere to many different surfaces and can be sprayed in different thicknesses to improve roof drainage.

Ultimate Linings Sprayed Polyurethane Foam and Polyurea roofing

Waterproof.ie foam and polyurea is a great insulator, thanks to the tight bond of the molecules and its seamless application. Finally,Waterproof.ie foam and polyurea roofs are extremely strong, capable of withstanding tornadoes and hurricanes that bring other roofing systems down. If you don’t use spray applied coatings, we believe Waterproof.ie foam and polyurea best flat roofing system available today.


If you are looking to replace your roof or just learning to be prepared in the future, we hope this was a valuable resource for you. If you have any other flat roofing options that you have questions about that we didn’t cover, get in touch with us and we will tell you all we know.